Kyber Sentinel Edge

Self-healing nodes for hospitals, towers, campuses, and industry.

Commercial building hardware

EDGEENTERPRISEDistributionEDGECampus / hospitalMICROStructureFeederLoadProtective action · < 5 ms

Keep the building up

Panel-room installation at commercial voltage. The feeder event stops at the service.

How it works

What Edge acts on →

  • TelemetryBuilding + grid
  • Digital TwinCampus graph
  • Fault LocationTo the panel

Put millisecond isolation in the panel room.

Sentinel Edge is the commercial-building tier of the Physical Intelligence Platform. Installed in panel rooms at hospitals, office towers, campuses, and industrial facilities, it uses the same Atlas twin and fault location that watch the feeder — then executes protective switching at building voltage so a utility event does not take the whole facility down.

See how a campus deploys Edge →

The campus that can heal itself.

Edge sits between the utility service and the loads that cannot wait on a truck: operating rooms, data halls, labs, and production lines.

  • Commercial voltage, panel-room install.

    Designed for the rooms facilities already know. No substation crew required. Building engineers and certified electricians set the node.

  • Atlas still sees the feeder.

    Telemetry from the utility side and the building side feed the same twin. Fault location tells Edge whether the problem is upstream or inside the facility.

  • Hospitals do not ride through on hope.

    Protective switching in under five milliseconds isolates the faulted path and holds critical buses — before most occupants notice the lights.

How Sentinel Edge works

  1. /01

    Telemetry at the service

    Atlas ingests building meters, transfer-switch status, and the utility telemetry already on the feeder that serves the campus.

  2. /02

    A twin of the facility

    The graph covers utility takeoff, main switchgear, and critical buses so operators and facilities share one picture.

  3. /03

    Fault location, then isolate

    When the signature is on the incoming feeder, Edge sheds or transfers. When it is internal, Edge opens only the faulted path.

  4. /04

    Command stays in the loop

    The action reports to Command so the utility desk and the campus facilities team see the same restoration state.

How a campus implements Sentinel Edge

Hospitals, universities, and industrial sites usually add Edge after the serving utility has Atlas live — or as a building-first deployment that later joins the utility twin.

  1. 01

    Map the critical buses

    Facilities and Kyber list the panels that must stay up: OR, ICU, labs, data halls, process lines.

  2. 02

    Connect building telemetry

    Meters, ATS, and existing BMS points feed Atlas so the twin includes the facility, not only the street.

  3. 03

    Install in the panel room

    Certified electricians set Edge nodes at commercial building voltage on the agreed switchgear.

  4. 04

    Join the utility graph

    If the serving utility runs Atlas, the building twin attaches to the feeder model. Faults resolve as one event, not two tickets.

  5. 05

    Arm protective schemes

    Shadow, then live. Edge isolates in under five milliseconds; Command verifies; facilities stop running the outage from a radio.

Where Edge is deployed

Anywhere a building’s mission cannot wait on the feeder — and anywhere a utility wants its most critical customers to stay up.

Get started with Sentinel Edge

Submit opens your email app with this request already written to kybertechnologies.inc@gmail.com. Press Send there.