Kyber Sentinel Enterprise

Self-healing nodes at substations and feeder switching points.

Utility distribution hardware

ENTERPRISEENTERPRISEDistributionEDGECampus / hospitalMICROStructureFeederLoadProtective action · < 5 ms

Protect the feeder

Professional installation at distribution voltage. Isolation in under five milliseconds.

How it works

What Enterprise acts on →

  • TelemetryFrom Atlas
  • Digital TwinLive graph
  • Fault LocationTo the span

Give the utility network a physical reflex.

Sentinel Enterprise is the utility-scale hardware tier of the Physical Intelligence Platform. Installed at substations and feeder switching points, it executes the protective switching Atlas locates and Command authorizes — opening, transferring, or isolating a faulted span in under five milliseconds, faster than any human desk or centralized SCADA poll.

See how a utility deploys Enterprise →

The iron that closes Atlas and Command.

Enterprise sits on the same feeders the twin already models. When a signature appears, the node does not wait for a truck or a radio call. It isolates the segment and writes the new topology back.

  • Distribution voltage, professional install.

    Rated for utility distribution. Crews set Enterprise at substations and feeder switching points alongside existing reclosers and switches.

  • Telemetry to action, not a ticket.

    Atlas ingests SCADA and AMI, keeps the twin current, and locates the fault. Enterprise is the device that actually opens the iron.

  • Under five milliseconds.

    Local execution beats a human operator and a centralized SCADA command, so most customers never see the interruption.

How Sentinel Enterprise works

  1. /01

    Telemetry from the feeder

    Atlas reads voltage, current, and breaker status from the SCADA and sensors already on the circuit. Enterprise is placed where that circuit can actually be opened or transferred.

  2. /02

    The twin names the span

    State estimation and the graph model keep a living picture of ties, open points, and load. Fault location pins the event to a feeder segment, not a county.

  3. /03

    Local protective switching

    Enterprise executes the isolate or transfer in under five milliseconds, using the live graph so the rest of the feeder stays energized.

  4. /04

    Report into Command

    The new state streams back. Dispatchers see what already isolated, crews are sent only if iron still needs a human, and the twin updates.

How a utility implements Sentinel Enterprise

Municipal utilities and rural electric cooperatives start here: the worst-performing feeders, the substations they already own, and the switching points Atlas has already mapped.

  1. 01

    Stand up Atlas first

    Connect SCADA, AMI, and existing IoT so the twin and fault location are live before hardware is set.

  2. 02

    Rank the feeders

    Use Atlas risk and historical SAIDI/SAIFI to pick the substations and switching points where a five-millisecond isolate pays back first.

  3. 03

    Install at distribution voltage

    Utility crews or a Kyber-certified partner set Enterprise nodes at the selected substations and feeder switches.

  4. 04

    Shadow, then arm

    Nodes report and recommend while operators still switch by hand. When sequences match the desk, autonomy is armed.

  5. 05

    Extend with Edge and Micro

    Once the feeder heals itself, add Sentinel Edge in hospitals and campuses and Sentinel Micro on critical structures on that same circuit.

Where Enterprise is deployed

Enterprise is the first hardware a utility buys. It is also the node that later serves military installation feeders and campus takeoffs.

Get started with Sentinel Enterprise

Submit opens your email app with this request already written to kybertechnologies.inc@gmail.com. Press Send there.